Xerox Document Centre ColorSeries 50, User Manual

Page: 74 / 261

MAKING COPIES 3–15 DOCUMENT CENTRE CS 50 USER GUIDE
1
2
3
4
5
6
7
Preserving your colour output
Colour output, like black and white output, should
be handled and stored carefully to preserve its
appearance and usability. Your colour output,
which is made from colour dry inks (toners),
requires a little special attention. To help preserve
the fidelity of your colour output, Xerox
recommends that you consider the following:
Adhesive tapes and adhesives
Some adhesive tapes and adhesives (glues)
contain solvents that may soften or dissolve the
colour dry ink (toner). Adhesive tapes and
adhesives should be tested on sample output
before being applied to your valuable copies or
prints. Adhesive tape may also pull off the dry ink
(toner) when the tape is removed.
PVC and colour output
If your output comes in contact with PVC and
PVC-type (vinyl) plastics, the dry ink (toner) may
soften and transfer to the plastic. Use
polypropylene and polyethylene plastics for any
covers or binders that come in contact with the
colour output.