Xerox Document Centre ColorSeries 50, User Manual

Page: 65 / 261

MAKING COPIES 3–6 DOCUMENT CENTRE CS 50 USER GUIDE
1
2
3
4
5
6
7
Quick copy
The procedure below helps you make simple
copies without changing any options.
1
Press the Clear All (CA) button to clear any
previous programming.
2
Perform one of the following:
•
Raise the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover
and place the document face down onto the
Document Glass, as in Figure 5.
Make sure the document lies against the
registration area at the left rear corner of the
glass. The Registration area is identified with
an arrow.
Lower the Duplex Automatic Document
Feeder (DADF) or Document Glass Cover.
•
If you have a Duplex Automatic Document
Feeder, place the document face up into the
DADF Tray, as in Figure 6. The Document
Feed Lamp lights when the document is in the
correct position. Ensure that the paper guide
is against the original document.
Figure 5: Placing a document on the
Document Glass
Figure 6: Placing a document in the
DADF Feeder Tray
Document Feed Lamp