Xerox Document Centre ColorSeries 50, User Manual

Page: 189 / 261

PAPER 9–10 DOCUMENT CENTRE CS 50 USER GUIDE
1
9
3
4
5
6
7
Loading stock into Paper Tray 5
The number of sheets that can be loaded in Paper
Tray 5 (sheet capacity) varies with the weight of
the stock. For more information about paper
weight and requirements, refer to the
Recommended Materials for the Document
Centre ColorSeries 50
.
Do not load materials above the fill line located on
the paper guide.
KEY POINT: Because of the paper path design of
Paper Tray 5, paper stocks that cause difficulties
being fed from Paper Tray 1, 2, 3, or 4 may be fed
more reliably from Paper Tray 5.
NOTE: Remove all stock from Paper Tray 5 after
the job is complete. Dust and moisture can cause
copy quality defects.
Do not add paper during a copying job.
•
To prevent damage, close Paper Tray 5 when
you are not using it.
•
If you are loading pre-drilled paper, load it with
the undrilled long edge as the leading edge
(holes to the left).
•
Load letter-head paper face up.
•
If you are loading transparencies, load them
with the white stripe side facing down and as
the leading edge. (The leading edge is the
edge that feeds into the copier/printer first.)
Figure 114: Paper Tray 5