Xerox Document Centre ColorSeries 50, User Manual

Page: 183 / 261

PAPER 9–4 DOCUMENT CENTRE CS 50 USER GUIDE
1
9
3
4
5
6
7
Auto Tray Switching
The Auto Tray Switching feature enables the
copier/printer to switch automatically to another
tray when a tray runs out of paper. The trays must
be loaded with the same size paper in the same
orientation (long edge feed or short edge feed).
Also, Auto Tray Switching must be enabled in the
Tools mode, with the same paper type assigned to
two or more trays.
Auto Tray Switching may be enabled only for
Paper Trays 1, 2, 3, and 4. Paper Tray 5 cannot
be enabled for Auto Tray Switching.
Auto Tray Switching is active only if the Auto
paper supply button is selected.
The default for Auto Tray Switching is ON with
Paper Trays 1, 2, 3, and 4 enabled. To use Auto
Tray Switching with the default settings, load the
trays you want to use with the same size paper in
the same orientation. Select the paper tray button
for the tray with the lowest number on the Control
Panel.
For example, if you load trays 2 and 3 with the
same size paper in the same orientation, select
the Tray 2 Paper Supply button on the Basic
Copying tab of the Touch Screen. The copier/
printer draws paper from Tray 2 until it is depleted,
then switches automatically to Tray 3.