DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–23
TOOLS MODE
1
2
3
4
5
6
7
Edge Erase
This option allows you to set the Edge Erase
default to eliminate the shadows that are caused
by the document edges during the copying
process.
This feature offers two options, as illustrated in
Figure 31:
•
No Erase — Uses 2 mm edge erase. This
factory setting cannot be eliminated.
•
Variable Erase to display an additional
screen with variable shift settings. This screen
will display values in either inches or mm,
depending on Localization settings specified
on the Machine Set-up screen.
Under the Top & Bottom button, touch the up
arrow to increase the amount of erasure at
the top and bottom edges. Touch the down
arrow to decrease the amount of erasure at
the top and bottom edges.
Under the Left & Right button, touch the up
arrow to increase the amount of erasure at
the left and right edges. Touch the down
arrow to decrease the amount of erasure at
the left and right edges.
When you are making 2-sided copies, Edge Erase
is applied to both sides of the output.
NOTE: A factory setting for a 2 mm edge erase
cannot be eliminated. See the User Guide for
more information on this setting.
Figure 31: Edge Erase screen with
Input Erase Value selected
Summary of Contents for Document Centre 50
Page 1: ......
Page 22: ...CONTENTS XXII DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 1 2 3 4 5 6 7...
Page 137: ......
