TOOLS MODE
3–26
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE
1
2
3
4
5
6
7
Machine Set-up
Use these settings to limit the number of copy
sets, disable/enable the Power Saver mode
option, select desired display units, and enter
network information.
1
On the Tools screen, touch the Machine Set-up
button to display the Machine Set-up screen, as
illustrated in Figure 38.
2
Review the current settings for each item. To
change a setting, use the up and down arrows to
highlight the desired item and touch the Change
Settings button to display the detail screen.
3
Perform one of the following:
•
On the Copy Quantity Limit screen (Figure
39), use the numeric keypad to enter the
maximum number (1—999) of copies/sets
allowed.
•
On the Power Saver Default screen (Figure
40), touch either the Enabled or Disabled
button.
NOTE: If the Power Saver Default option is
disabled, the Power Save Timeout in Machine
Timouts will not be selectable.
Figure 38: Machine Setup screen
Figure 39: Copy Quantity Limit screen
Figure 40: Power Saver Default screen
Summary of Contents for Document Centre 50
Page 1: ......
Page 22: ...CONTENTS XXII DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 1 2 3 4 5 6 7...
Page 137: ......
