DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–27
TOOLS MODE
1
2
3
4
5
6
7
•
On the Localization screen (Figure 41), touch
the setting for Inches or Millimeters to indicate
the desired units for display on the Touch
screen.
•
On the IP Address screen, Subnet Mask, and
Gateway Address screens, enter the
appropriate address using the numeric
keypad. Enter spaces as zero.
As shown in the IP Address screen example
in Figure 42, an address of 1.150.75.120
would be entered as 001.150.075.120.
•
On the Frame Type screen (Figure 43), touch
the appropriate Frame Type.
•
On the Source Routing screen (Figure 44),
touch Yes or No to indicate if source routing is
taking place.
4
Touch Save to display the Machine Set-up screen.
5
Repeat steps 2 through 4 until all necessary
information is entered.
6
Touch Close to display the Tools screen.
Figure 41: Localization screen
Figure 42: IP Address screen
Figure 43: Frame Type screen
Figure 44: Source Routing screen
Summary of Contents for Document Centre 50
Page 1: ......
Page 22: ...CONTENTS XXII DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 1 2 3 4 5 6 7...
Page 137: ......
