Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual Download Page 11

Page: 11 / 144

Advanced Features and Troubleshooting Manual

Symbols as marked on product:

DANGER high voltage:

Protective ground (earth) terminal:

Hot surface on or in the printer. Use caution to avoid personal injury:

Use caution. Refer to the manual(s) for information:

Warning

If the product loses the ground connection, usage of knobs and controls (and other conductive parts)
can cause an electrical shock. Electrical product may be hazardous if misused.

Warning

For your protection, do not defeat any interlocks.

0730-05

0730-06

0730-07

0730-08

0730-09

0730 10

Summary of Contents for 1235/DX - Phaser Color Laser Printer

















































































































































Search results

Summary of Contents for 1235/DX - Phaser Color Laser Printer

Reviews:

Related manuals for 1235/DX - Phaser Color Laser Printer

Brands by name

Popular brands

Xerox 1235/DX - Phaser Color Laser Printer, Advanced Features And Troubleshooting Manual

Search results

Summary of Contents for 1235/DX - Phaser Color Laser Printer

Reviews:

Related manuals for 1235/DX - Phaser Color Laser Printer

Brands by name

Popular brands