Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual Download Page 65

Page: 65 / 144

Advanced Features and Troubleshooting Manual

Managing Printer Usage

To move the cursor to the second digit, press

Item Up

and you will see:

To change the value of the second digit, press

Value Up

and you will see:

Continue to use the

Value Up

button to change the value of the current digit and the

Item Up

button to move to the next digit to the right. (Pressing

Item Down

will move the cursor to the

left.)

When you have completed the address, press

Enter

, then

On Line

For the new value to take effect, you need to restart the printer inside the

Job Menu

, or power

the printer off and on again.

†

Note that the buttons have graphics and numbers only (no written labels) on the 220 V

models of the printer. Please see

Front Panel Layout

on page 39 for button numbers and

graphics.

IP Address
200.000.000.000

IP Address
210.000.000.000

Summary of Contents for 1235/DX - Phaser Color Laser Printer

















































































































































Search results

Summary of Contents for 1235/DX - Phaser Color Laser Printer

Reviews:

Related manuals for 1235/DX - Phaser Color Laser Printer

Brands by name

Popular brands

Xerox 1235/DX - Phaser Color Laser Printer, Advanced Features And Troubleshooting Manual

Search results

Summary of Contents for 1235/DX - Phaser Color Laser Printer

Reviews:

Related manuals for 1235/DX - Phaser Color Laser Printer

Brands by name

Popular brands