79
With the function “ import and export calibration parameters”, you can export the calibration
parameters in the existing controller system through the U disk for backup, or import the calibration
to restore the calibration parameters.
Steps of importing/exporting calibration parameters
1. Insert the U disk, after the U disk is successfully identified
2. Open the menu and click "System→Import and Export Calibration Parameters"
3. (Export) Click the [Select Directory] key (select directory) of the export module to confirm the
selection.
4. In the import/export calibration parameter interface, click the [Export] key to export the
calibration parameters.
5. (Import) Click the [Select File] key of the import module (select Calbration.zip) to confirm the
selection.
In the import/export calibration parameters interface, click the [Export] key, prompt message
"Importing file is successful, please power off and restart the controller!" The imported calibration
parameters will take effect after power off and the restart.
Figure 18-5 Import and export calibration parameters
When the network connection fails, the calibration parameters cannot be
imported or exported