78
3. Click the [Select Directory] key of the export module to confirm the export path
4. Click the [Export] key, after prompting that the export is successful, the corresponding file will
be found under the selected export path
Figure 18-3 Import and export user’s PLC-1
Steps of importing user’s PLC
1. Insert the U disk, after the U disk is successfully identified
2. Open the menu and click "System→Import and Export User PLC"
3. Click the [Select File] key of the import module (select the app file) to confirm that you want to
import the file
4. Click the [Select File] key of the import module (select the crc file), and confirm that you want
to import the file
5. Click the [Import] key, prompt message "Importing file is successful, please power off and restart
the controller!" The imported user PLC will take effect after power off and the restart.
Figure 18-4 Import and export user’s PLC-1
18.8 Import and export calibration parameters
Description
When the network connection fails, the user PLC cannot be imported or
exported
Note: The PLC must match the controller
version