25
6. Click the "OK" button to complete the configuration
Pic 5-3 Alternate button configuration
5.4 Axis group configuration
Description
The axis group configuration uses switching with models and load settings
Steps:
IO type: Press the corresponding configuration auxiliary button to set
the IO value to ON or OFF.
Process package: If a process package is installed in the teaching
software, press the corresponding configuration auxiliary button to
quickly open the process package interface (shortcut key to open the
process package)
Non-debuggers should not set the configuration of the axis group at will.
Make sure that the model matches when configuring. After the setting is
completed, check whether the zero point and limit are correct. The setting
authority is Final. (Re-switching the model will lose the zero point, limit
and other parameters, do not operate at will, you need to back up the system
parameters first)
Load classification: light load, medium load, heavy load