WTC MedWeld 5000, Technical Reference Manual

Page: 49 / 120

Communications and I/O
MedWeld 5000 Technical Reference Manual 3 - 11
M-032170
DeviceNet Bitmap
Number
Type
Name Description
1 Input Weld / No Weld Active high is Weld Mode, active low is No Weld
Mode.
2 Input Fault Reset Resets faults in timer / weld control.
3 Input Weld Fault Acknowledge Acknowledges a weld error.
4 Input Binary Select #1 Binary Select #1
5 Input Binary Select #2 Binary Select #2
6 Input Binary Select #4 Binary Select #4
7 Input Binary Select #8 Binary Select #8
8 Input Binary Select #16 Binary Select #16
9 Input Binary Select #32 Binary Select #32
10 Input Initiate Weld Initiates a weld schedule based upon Binary Select.
11 Input Spare Spare
12 Input Spare Spare
13 Input Stepper Reset Resets all steppers to zero.
14 Input Isolation Contactor Saver Enable Isolation Contactor Saver Enable bit
15 Input Control Stop Control Stop
16 Input Tips Dressed. Tips have been dressed.
17 Input Spare Spare
18 Input Spare Spare
19 Input Spare Spare
20 Input Spare Spare
21 Input Spare Spare
22 Input Spare Spare
23 Input Spare Spare
24 Input Spare Spare
25 Input Spare Spare
26 Input Spare Spare
27 Input Spare Spare
28 Input Spare Spare
29 Input Spare Spare
30 Input Spare Spare
31 Input Spare Spare
32 Input Spare Spare