WTC MedWeld 5000, Technical Reference Manual

Page: 10 / 120

Getting Started
x Modified: 1/31/06 MedWeld 5000 Technical Reference Guide
M-032170
Danger!
Always ensure proper flow rate, temperature
and chemistry of cooling water. Obstructed or
insufficient flow of cooling water may damage
welding transformers, SCRs or MFDC inverters.
Refer to “Cooling Water Requirements” on page
-xii for more details.
Danger! NEVER remove circuit boards with
110 VAC (or higher voltage) power applied. Be
certain to REMOVE POWER BEFORE servicing,
installing or removing circuit boards.
Caution:
When lifting any weight over 20 kg (~45 lb.),
use either a two-man lift or an assisted lift.
How to Use this Manual
This manual is designed as a reference guide. Use it as you would a
dictionary. See the Table of Contents to locate the instructions or
information you require. For additional details, you are referred to the
appropriate sections and page numbers.
The Table of Contents lists each section and subsection. In these
sections, descriptive subheadings indicate the information provided.
Simply flip to the page number and subheading indicated.
Detailed procedures describe the steps required to perform each
programming task. Other descriptions explain the procedures for
installation, initialization and troubleshooting, along with explanations
of the hardware and each weld function.