ECRESO FM 100/300 W, user manual– 06/2015
Page 30
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
4.4.
With the Communication Pack option
4.4.1.
Network configuration
If the Communication Pack option is enabled, first set the IP address with the front panel:
9 8 . 0 0 M H z
0 W
From the main screen, press the "Enter” key to display menus
then the “+” key until you see the Network menu.
9 8 . 0 0 M H z
1 0 0 W
-> N E T W O R K >
1
N E T W O R K -> A D R
-> 1 9 2 . 1 6 8 . 0 1 2 . 1 0 3
1
N E T W O R K -> M A S K
-> 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
Once you see this screen, press “Enter”.
The IP address screen is displayed: press “Enter” to switch to
edit mode. Use the “+” and “–” keys to adjust values and the
“Enter” key to confirm.
Press the “+” key to display the Netmask and modify it if
needed. Press the “Enter” key to confirm.
4.4.2.
Connecting to the web interface
Now the transmitter is set, connect it to the network.
Though the web application is compatible with most browsers, performances vary from one browser to another.
Below is a list of compatible browsers from the most performing to the less performing by operating system:
Windows XP: Google Chrome / Mozilla Firefox
Windows Vista: Google Chrome / Mozilla Firefox
Windows 7: Google Chrome / Mozilla Firefox / Microsoft Internet Explorer 11
Windows 8: Google Chrome / Mozilla Firefox / Microsoft Internet Explorer 11
Mac (OSX 10.9): Google Chrome / Mozilla Firefox / Safari
Linux (2013): Google Chrome / Mozilla Firefox
You may also use Google Chrome Portable available on the Ecreso CD; this version can work without being
installed on your PC (it can be on a flash drive).
The browser may display a message indicating that the connection is not certified. Audemat cannot indeed certify
your unit’s address; however, the site is secured (data is encrypted) and you may proceed to access it.
Open a web browser and enter in the address bar the transmitter’s IP address such as it was set above.
Select the language if necessary.
Enter the user name and password (default:
Admin
/
admin
) and the screen name of your choice. It is used to
communicate with other connected users.
You can now access the web interface.
!
The transmitter must be in remote mode before parameters can be modified. Press the Local button if needed.
