ECRESO FM 100/300 W, user manual– 06/2015
Page 31
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
4.4.3.
Configuring the transmitter
Click the button
in the tool bar to access the transmitter configuration and display the ‘Easy Config’
page.
Basic configuration can be managed on this single page:
Power, frequency and RF on
Input priority setting
MPX configuration
Input configuration
Default transmitter pre-accentuation is 50 µs. Depending on your country, you might need to switch it to 75 µs (in the
United States for instance). The Pre-accentuation parameter is available in the Input Source section.
Once values have been changed, click the button
to save the new settings.
4.4.4.
Getting on air
1.
Disable the RF by clicking the button on top of the page.
2.
Make sure the RF indicator LED is off.
3.
Disconnect the load and connect the antenna to the transmitter RF output.
4.
Enable the RF again by clicking the button on top of the page.
