ECRESO FM 100/300 W, user manual– 06/2015
Page 167
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
APPENDIX A:
SOFTWARE OPTION MANAGEMENT
A set of options is available for ECRESO FM transmitters. Contact your WorldCast Systems dealer if you wish to install
one of them after the initial transmitter purchase.
You will need to retrieve the software activation key from the transmitter and forward to your WorldCast Systems
contact. From this activation key a new key will be created which will unblock the desired option. The last step will be
to send it to the transmitter.
This activation process can be done using the front panel, the PC application or serial commands. Follow the selected
procedure as described below.
At the end of the procedure, users connected to the embedded web site will have to reload it to display pages
related to the new option.
A.1.
Using the front panel application
Display the License menu, only visible in Expert mode (first
switch to Expert mode if necessary).
9 8 . 0 0 M H z
1 0 0 W
-> L I C E N S E >
1
S E R I A L
N U M B E R
0 0 0 0 0 0 2 5
1
E N A B L E
L I C .
-> N E W >
2
G E N E R A T E
K E Y
-> G O
1
E N A B L E
L I C .
-> P E N D I N G
2
E N T E R
K E Y
-> 0 0 0 0 0 0 0 0 0 0 0
1
G O
T O
-> L I C E N S E
-> A D D .
1
C U R R E N T
L I C E N C E
-> R D S B A S I C , P L A Y E
Press the “Enter” button and write down the transmitter’s serial
number.
Press the “+” key until you see this screen.
Press the “Enter” button to access the Enable License sub-menu,
then press “Enter” again to generate the key for your
transmitter.
Send the serial number and the key to WorldCast Systems.
A new key will be returned to you.
To enter the new key, access the License menu then access the
Enable License screen. The ‘Pending’ state indicates the
transmitter awaits a new key.
Once you have received the new key, press the “Enter” button
to display this screen and press Enter again to switch to edit
mode.
Using the “+” and “–” keys, adjust the value for each digit, press
“Enter” to go to the next digit.
Press the “+” key until you see the Go To screen and select
‘License’ to return to the previous level of menus.
Press the “+” key to access the Current License screen. The new
license should now be part of the list.
