ChatterBox GMRS XI Manual Download Page 1

Page: 1 / 24

INTRODUCTION

Thank you for your recent purchase of the ChatterBox GMRS X1
Bluetooth

system.The GMRS X1 Bluetooth

is a 2 channel (38 talk

groups) UHF transceiver with up to 5 mile range. Bluetooth

Advanced Audio Distribution Profile (A2DP) technology allows pairing
of a Bluetooth

equipped cell phone and a Bluetooth

audio source

simultaneously without the use of wires. Enjoy the luxury of answer-
ing your Bluetooth

cell phone and listening to a music source

(Bluetooth

enable or with a Bluetooth

adapter) or get voice

prompted directions from your Bluetooth

GPS system. Other fea-

tures include improved Hi-Fi stereo speakers, dynamic noise reducing
microphone, voice activation (VOX), illuminated LCD display, and a
built in intercom for communicating with a passenger.Your new
ChatterBox GMRS X1 Bluetooth

will greatly enhance your riding

experience in every way.

ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 1

Summary of Contents for GMRS XI

























Search results

Summary of Contents for GMRS XI

Reviews:

Brands by name

Popular brands

ChatterBox GMRS XI, Manual

Search results

Summary of Contents for GMRS XI

Reviews:

Brands by name

Popular brands