2) Proceed to conduct the Pairing procedure listed above in
bold.
3) After the Bluetooth
®
logo is blinking and you have
released the Intercom/monitor button,, proceed to plug
the Bluetooth
®
adapter into your music device while fol-
lowing any type of pairing instructions that came with it.
4) Allow up to 30 seconds for the devices to pair and the
music should automatically start playing through the head-
set. If this does not occur after 30 seconds proceed to
turn the ChatterBox off and conduct the steps again from
the beginning.
5) After the two devices have been successfully paired you
can turn either unit off then on again and they will auto-
matically pair.
When a music source is successfully paired with the ChartterBox you
may be able to control certain features of the audio source with your
ChatterBox controls (does not apply to all audio sources). If your
audio source is compatible you must first switch the ChatterBox
mode to Bluetooth
®
mode. In order to do this you must push and
hold the MODE button until the screen displays “BT”. When the
ChatterBox is in this mode you can adjust the volume level of the
music with the volume control on the ChatterBox.You can also navi-
gate through the song list by using the channel UP and DOWN but-
tons. In order to go back to communication mode press and hold the
MODE button again until the “BT” on the display shows the usual
Channel Idle mode.You are in normal idle mode when you can adjust
the volume of your voice when communicating as well as the usual
features of the ChatterBox.
B) INSTRUCTIONS FOR PAIRING WITH CELL PHONE ONLY
Before proceeding with the following steps, please familiarize yourself
with your phones Bluetooth
®
instructions and procedures.
1) Activate the Bluetooth
®
feature on your cell phone (do
not search for devices yet). After doing so you should see
the Bluetooth
®
logo appear on the main idle menu of your
phone.
11
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 10
