background image

OVERVIEW 

1

III.  OVERVIEW 

DialMate is an intelligent state-of-the-art call management system that, once 
installed on an analog telephone line with three-way (conference)/transfer calling, 
reverses, bridges and forwards/transfers calls, resulting in tremendous savings on 
your phone bills. 

DialMate is simple to use and does not require a computer or programming skills.    
Because call charges are from DialMate’s location, you can take advantage of low 
residential, business, cellular/mobile phone and Voice Over Internet Protocol 
(VOIP) rates compared with rates of pay phones, calling cards, hotels and foreign 
telephone companies. 

The device is equipped with a voice chip that can record a greeting to get through 
hotel and PBX operators or request callers to stay on the line while their calls are 
being forwarded or transferred.  This gives you the convenience and flexibility you 
need to communicate wherever you may be.  With DialMate, you can make free 
calls from hotel rooms, pay phones, and cellular phones; completely bypass 
foreign telephone companies’ long distance charges when calling from overseas 
and take advantage of VOIP flat domestic and international rates. The CM1003 
also has the unique capability of performing transfer switching during call back, 
bridge and forward for services (PABX, Centrex and VOIP) that have the call 
transfer feature. 

FEATURES/APPLICATIONS/BENEFITS 

 

Can be used as a call back, call bridge, call forward or call transfer device 
without a computer. 

 

If installed on a USA 800 number, the line can be used as a toll-free 
international number. This will provide foreign companies/individuals with 
virtual USA presence. 

 

Enables foreign (outside the USA) users to access USA 800 numbers 
without assistance of an operator. 

 

Enables international user to take advantage of flat rates charged by 
telephone companies/long distance carriers and VOIP providers in the United 
States.  

 

Enables telecommuters to receive and transfer calls as if they were in the 
office. 

 

Enables users to charge their personal calls to their home phone when at 
work, and telecommuters to charge their business calls to their companies 
when working at home. 

Summary of Contents for DialMate CM 1003



































Reviews: