ON-SITE PROGRAMMING
10
PABX Prefix and Suffix are now both clear. This is the default condition.
Phone Card and Dial-Around Services
DialMate enables you to use your USA phone cards or access other carriers to call
anywhere even from overseas. A phone card’s toll-free access number and PIN or
an alternative carrier’s dial-around number (e.g., 1010321) may be stored as a
prefix so that these numbers do not have to be dialed repeatedly with the
destination number. However, during operation, should you want DialMate to skip
dialing the pre-programmed prefix, enter “
P
” before the destination number.
Program I: Setting the Flash Hook Duration
By default, DialMate’s flash hook is set at 500 milliseconds. However, some
foreign telephone lines or PABXs expect shorter or longer flash hooks. If DialMate
is not able to get another line after the 1
st
flash hook, i.e., you hear DialMate’s
dialing tones after the flash hook, then adjust the flash hook duration accordingly.
STEPS USER
DIALMATE
press “7”
NN8
wait for a beep
8
select one from the ff.:
0 (100 ms)
1 (250 ms)
2 (500 ms)
3 (700 ms)
4 (800 ms)
5 (1 second)
J8
wait for the 2-beep confirmation/prompt for the next
instruction
8
Flash hook duration is now set to 500 milliseconds. This is the default condition.
