Setup & Operation
Preparing The Sawmill For Towing
2
2-45
HDSdoc030722
Setup & Operation
CAUTION!
It is important that the lower stop bolts are properly
adjusted to secure the carriage on the track rail. Failure to properly
adjust the stop bolts can cause saw head damage, especially during
mill transportation.
9.
If necessary, adjust the two stops located at the bottom of the mast so the saw head contacts them
after it is lowered 3/4" (19 mm) past where it contacts the rest pin.
See Figure 2-32.
10.
Push the START button to start the motor. This keeps the drive belt tight and the motor from
bouncing while traveling.
11.
Hook the carriage safety chain located at the bottom of the carriage to the bracket at the bottom of
the mast.
See Figure 2-33.
CAUTION!
Check to be sure the saw head safety chain is secured
before towing the sawmill. Failure to properly secure the saw head can
FIG. 2-32
FIG. 2-33
Loosen jam nut
and turn bolt
to raise or lower
stop bolt
Loosen jam nut
and turn bolt to
raise or lower
stop bolt
Safety chain
