Safety & General Information
Noise Level
Safety & General Information
HDSdoc030722
1-14
1
See Table 1-7.
The power options available for the LT40 Series AH sawmills are listed below.
See Table 1-8.
The remaining motors used in sawmills are listed below.
See Table 1-9.
See the table below for power supply specifications for the LT40 sawmill.
DANGER!
It is recommended that a 30mA Ground Fault Interrupter
(GFI) be used.
1.10 Noise Level
See Table 1-10.
The average noise level is given in the table below
12
.
Model
Manufacturer
Rated
Output
Current at
380V, 50Hz
Rated Speed
Weight
3Sg 160M-2B-HM-T
Motor, Tamel
Tamel SA,
Poland
15kW
(20KM)
28,1 A
2930 RPM
117 Kg
3Sg 160L-2-HM-T
Motor, Tamel
Tamel SA,
Poland
18.5kW
(25KM)
33,8 A
2930 RPM
135 Kg
TABLE 1-7
Model
Manufacturer
Voltage
Rated Output
Power Feed Motor
controlled by ALTIVAR (Super)
Besel, Poland
3x400V
1,1 kW, 1380 r.p.m.
Up/Down Motor
(2-Speed, Super only)
Besel, Poland
3x400V
0.55/0.9 kW,
950/1400 r.p.m.
Hydraulic Pump Motor (Super only)
Besel, Poland
3x400V
4 kW
Blade Guide Arm Motor
Motor Products
Owosso, USA
12V
17W, 60 r.p.m.
TABLE 1-8
3-Phase
Volts
Fused
Disconnect
Switch
Recommended
Wire Size
15kW
(EA20)
400 VAC
32 A
6 mm
2
up to 15 m of length
18,5kW
(EA25)
400 VAC
40 A
6 mm
2
up to 15 m of length
Hydraulika
(+4kW)
400 VAC
+10A
+1,5 mm
2
up to 15 m of length
TABLE 1-8
Sawmill
Noise Level L
EX8
LT40AE15AH
77,1 dB (A)
TABLE 1-10
