Sawmill Alignment
Adjusting Bed Rails To The Blade
5
5-12
HDSdoc030722
Sawmill Alignment
13.
Measure the distance between the bottom of the blade and the bed rail at each end of the bed rail.
The bed rail should measure 15" (375 mm) (+ 1.0 mm on the outer end) from the blade at each end
of the rail.
See Figure 5-10.
See Figure 5-11.
Optional bed rail (angled)
14.
Loosen the bed rail clamping bolts and turn the adjustment bolts to move the bed rails to the blade
if necessary.
15.
Retighten the clamping bolts and adjustment bolts.
16.
Without adjusting the saw head height, check the three remaining main bed rails and the rear pivot
rail. Adjust them so that all measure the same distance from the blade at both ends of the bed rail.
FIG. 5-10
FIG. 5-11
Blade
Bed rails
Clamp bolt
Clamp bolt
Adjustment bolt
Adjustment bolt
SM0064_D
Blade
Bed rails
Clamp bolt
Clamp
Adjustment bolt
Adjustment bolt
Adjustment
bolt
bolt
