Wood-mizer LT40 AH Series, Safety, Setup, Operation & Maintenance Manual

Page: 123 / 146

Sawmill Alignment
Adjusting Bed Rails To The Blade
Sawmill Alignment HDSdoc030722 5-11
5
ment at each end of the pivot rail.
9. The two measurements should be 15" (375 mm).
10. Loosen the locking set screws and turn the inner height adjustment nut to adjust the height of the
inner end of the pivot rail.
See Figure 5-8.
See Figure 5-9. Optional bed rail (angled)
11. Loosen the jam nut and turn the outer adjustment bolt to adjust the height of the outer end of the
pivot rail.
12. Move the saw head so the blade is positioned over the center of the front main bed rail.
FIG. 5-8
FIG. 5-9
Inner Height
Adjustment
Nut
Outer Height
Adjustment
SM0134B
15 1/32" (375mm)
to blade
15" (375mm)
to blade
15” (375mm)
to blade
15 1/32” (375mm)
to blade
Inner Height
Adjustment
Nut
Outer Height
Adjustment Bolt
Outer Height
Adjustment Bolt
to blade
to blade
Inner Height
Adjustment Nut