Setup & Operation
Board Return
2
2-25
HDSdoc030722
Setup & Operation
2.11 Board Return
WARNING!
The automatic board return is intended to assist a second
operator in removing boards quickly. Do not use the board return when
operating the sawmill alone. Serious injury, death or damage to the
equipment may result.
WARNING!
Never use the board return table as a platform to stand on.
This table is designed and intended to assist in the removal of boards
only. Standing on the table may result in serious injury.
Sawmills can be equipped with a board return system. This system consists of an arm on the saw
head controlled by a toggle switch on the control panel. A board return table is also provided to catch
the board as it is removed from the log.
To activate the board return, turn the key switch to the #1 position. Push the toggle switch on the
control panel down. The board return arm located in the middle of the saw head will drop into
position.
See Figure 2-20.
FIG. 2-20
3h0433
