![Wood-mizer LT40 AH Series Safety, Setup, Operation & Maintenance Manual Download Page 129](http://html1.mh-extra.com/html/wood-mizer/lt40-ah-series/lt40-ah-series_safety-setup-operation-and-maintenance-manual_994651129.webp)
Sawmill Alignment
Blade Guide Arm Alignment
Sawmill Alignment
HDSdoc030722
5-17
5
See Figure 5-15.
7.
Adjust the blade guide arm to 1/2" (15 mm) from fully open. Measure the distance from the bottom of
the blade guide mounting block to the bed rail. This measurement should be 15", 375 mm (dimen-
sion B) or slightly higher because the saw head is tilted up 1/26" (1 mm) on the outside (
). If the measurement is different, adjust the blade guide arm vertically.
FIG. 5-15
Measure from blade
guide arm to bed rail
with arm open and closed