Safety & General Information
Cutting Capacity
1
1-13
HDSdoc030722
Safety & General Information
1.8
Cutting Capacity
See Table 1-4.
The log size capacities of the LT40 Series A H sawmills are listed below.
See Table 1-5.
The log size capacities of the LT40 Wide.
See Table 1-6.
The performance capacity of the LT40 Series sawmills is listed below. Peak cutting
rates are measured in 12” (30 cm) wide red oak and represent the capability of the sawmill only.
Rates based on using Tru-Sharp 1 1/2” x .045 blades.
1.9
Motor Specifications
Max.
Diameter
1
1
Maximum log capacity for a basic mill is 4400 lbs. (1996 Kg).
Max.
LT40 S AH
36" (91.5 cm) 15' 7" (4.8 m)
LT40 M AH
36" (91.5 cm) 20' (6.1 m)
LT40 S AH with Optional 6' Bed Extension
36" (91.5 cm) 22' 8" (6.9 m)
LT40 M AH with Optional 6' Bed Extension
36" (91.5 cm) 27' (8.2 m)
LT40 S AH with Optional 12' Bed Extension
2
2
Logs over 4400 lbs. must be distributed so that neither the basic mill or extension
is loaded beyond the 4400 lb. maximum weight rating. Loading logs heavier than
4400 lbs. (1996 Kg.) on a mill equipped with bed extension requires auxiliary log
handling equipment.
36" (91.5 cm) 28' 8" (8.7 m)
LT40 M AH with Optional 12' Bed Extension
36" (91.5 cm) 33' (10.1 m)
LT40 S AH with Optional 24' Bed Extension
36" (91.5 cm) 40' 8" (12.4 m)
LT40 M AH with Optional 24' Bed Extension
36" (91.5 cm) 45' (13.7 m)
TABLE 1-4
Max. cutting width
Max. cant width
Max. Diameter
Max. Length
LT40 S
84 cm (33")
62 cm (24")
100 cm (39")
4,8 m (15' 7")
LT40 M
84 cm (33")
62 cm (24")
100 cm (39")
6,1 m (20')
LT40 L
84 cm (33")
62 cm (24")
100 cm (39")
8,4 m (27')
TABELA 1-5
Model
Blade Speed
Cutting Rate
LT40 Series AH
30 m/s
18 m/min.
TABLE 1-6
