Rev AB
How to Setup the Printhead Settings 5-17
Wolke m600 touch Operator Manual
Note:
The printhead cannot be purged, if external sensor is configured and
the product is positioned in front of the sensor.
4
Navigate to
Tools > Setup >Consumables > Purge
. The Purge Printhead
screen appears.
How to Adjust Print Resolution
5
Navigate to
Tools > Setup > Printhead > Horizontal Print Density.
Select
the appropriate print density value and touch
OK
to confirm.
6
Navigate to
Tools > Setup > Printhead > Vertical Print Density.
Select the
appropriate print density value and touch
OK
to confirm.
How to Change Product Direction
7
Navigate to
Tools > Setup > Printhead > Product Direction.
Select the
appropriate direction and touch
OK
to confirm.
How to Change Product Orientation
8
Navigate to
Tools > Setup > Printhead > Product Orientation.
Select the
appropriate orientation and touch
OK
to confirm.
Figure 5-23: Print Resolution