Rev AB
Touch To Edit 6-15
Wolke m600 touch Operator Manual
f. Touch the date on the calendar to choose the date of the month, and
touch OK.
Note:
Any dates that are not available for selection because of pre-defined
rules that may have been set in CLARiSOFT
®
are dimmed.
5
Touch OK when you are satisfied that the information in the data
window is correct. The user interface checks the check box. If there are
only two user editable fields in the job, the user interface
automatically displays the second field. If there are three or more
fields, it displays the list of user editable fields, so that you can select
one.
When you touch OK at the final field for this job (and all the check
boxes are checked) the user interface shows you the preview of the
image.
6
At the preview, perform one of the following:
• If you are satisfied with the image and you want to run the new job,
touch OK. Products will be printed with the new image until you
make further changes or select a new job.
• If you are not ready to print the job, you can leave this screen as it
is. You can touch OK at a later stage, to select the job at that time.
• If you want to step back through the job select screens to make
alterations to the variable data, touch Cancel.
• To cancel the job selection altogether, touch Home button.
Touch To Edit
To update and change user fields quickly and easily in a printing job, the
user can use the ‘
Touch To Edit
’ feature.
Note:
Touch to Edit feature is turned off by default and needs to be activated in
Clarity Configuration Manager.
1
Select the ‘
Current Job Details Bar
’ to display the job preview.
