wolke m600 basic, Operator'S Manual

Page: 120 / 166

6-24 Line Select Mode Rev AB
Wolke m600 touch Operator Manual
• CODE128
• EAN128
• 2/5i
• Codabar
• Code39
• Datamatrix
• GS1-Datamatrix
• QR Code
• GS1 Databar Composite
Line Select Mode
If the Line Selection is enabled on the controller, you can assign a specific
job to the correct line.
To assign the correct job to the correct line, do the following tasks:
1
Select Job from the Home page (Figure 6-28).
2
To assign a particular job to Line 1 :
Figure 6-28: Select Job