Wolf cinema SDC-10, User Manual

Page: 20 / 79

19
SDC-10
BACK
HIDE LIGHT
LENS
MEMORY
LENS AP.
ANAMO.
HDMI 1
STAND BY
3D
FORMAT
HDMI 2 COMP.
LENS.
CONTROL
MENU
GAMMA
P.FILE
COLOR
ADJ.
PIC.
ON
FILM
NATURAL STAGE 3D
USER
INFO C.M.D.
ANIME CINEMA
PICTURE MODE
INPUT
TEMP
COLOR
3D
SETTING
To Turn OFF the Projector
This button sequentially switches 3D formats
(*) This function cannot be used when inputing
2D and frame packing 3D singles
Display the 3D setting menu
Use this function to sequentially select focus,
zoom and shift adjustment lens controls
To hide the image temporarily
To display/close the menu
This sequentially switches between users 1-5
To adjust color temperature
To set gamma
To Turn ON the Projector
To select input mode
This sequentially switches anamorphic modes
This sequentially switches the call up/save/edit
modes of your lens memory
To adjust Lens Aperture
To illustrate buttons on the remote control
for 7 seconds
To select confirm
To return to previous menu
To switch picture mode
Display the information menu
Color Space
Sequentially switched picture adjust items,
such as contrast and brightness. The switching
items are not the same for different models,
or different picture modes
Inserting Batteries into the Remote Control
• Slide open the rear cover, then insert the batteries according to the positive (+) and negative (-) indicator marks. Insert the
(-) end first.
• If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and
continue operating the remote control.
Remote Control Features
Remote Control