SDC-10
1080p D-IL A
®
3D Front Projector
User’s Manual
10
– Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:
a) When the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the Operation Manual, as an improper adjustment of controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance, this indicates a need for service.
– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer
or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that
the product is in proper operating condition.
– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other
products (including amplifiers) that produce heat.
– When connecting other products such as VCR’s, and DVD players, you should turn off the power of this product for protection
against electric shock.
– Do not place combustibles behind the cooling fan: for example, cloth, paper, matches, aerosol cans or gas lighters that present
special hazards when overheated.
– Do not look into the projection lens while the illumination lamp is turned on. Prolonged exposure to the strong light can result in
impaired eyesight.
– Do not look into the inside of this unit through vents (ventilation holes), etc. Do not look at the illumination lamp directly by
opening the cabinet while the illumination lamp is turned on. The illumination lamp also contains ultraviolet rays and the light is
so powerful that your eyesight can be impaired.
– Do not drop, hit, or damage the light-source lamp (lamp unit) in any way. It may cause the lamp to break and lead to
injuries. Do not use a damaged light source lamp. If the lamp is broken, ask your dealer to repair it. Fragments from a broken
lamp may cause injuries.
– Do not ceiling-mount the projector to a place which tends to vibrate; otherwise, the projector and/or mounting assembly could
be broken by the vibration, possibly causing it to fall or overturn, which could lead to personal injury.
– For health reasons, please take a break of about 5-15 minutes after every 30-60 minutes and let your eyes rest. Please refrain
from watching any 3D-images when you feel tired, unwell or if you feel any other discomfort. Moreover, in case you see a double
image, please adjust the equipment and software for proper display. Please stop using the unit if the double image is still visible
after adjustment.
– Once every three years, please perform an internal test. This unit is provided with replacement parts needed to maintain its
function (such as cooling fans). Estimated replacement time of parts can vary greatly depending on frequency of use and the
respective environment. For replacement, please consult your dealer, or the nearest authorized Wolf Cinema service center.
Summary of Contents for SDC-10
Page 1: ...SDC 10 ...
