9
SDC-10
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product
on bed, sofa, rug, or similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and the manufacturer’s instructions have been adhered to.)
– To allow better heat dissipation, keep sufficient clearance between this unit and its surrounding as shown below. When this unit
is enclosed in a space of dimensions as shown below, use an air-conditioner so that the internal and external temperatures are
the same. Overheating can cause damage.
– Use the power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product
dealer or local power company.
– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the
plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.
– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
– For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and
power line surges.
– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire
or electric shock.
– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other
hazards. Refer all service to qualified service personnel.
Summary of Contents for SDC-10
Page 1: ...SDC 10 ...
