Wolf cinema SDC-10 Page 68 User Manual Download

Page: 68 / 79

SDC-10

Pull the AC power plug
from the power outlet
before cleaning.

MEMO

If the filter is Damaged or Too
Dirty to be Cleaned

• Replace with a new filter. A dirty

filter will not protect the internal
parts of the unit and may cause
shadows to appear on the
video image.

• To purchase a new filter

contact your authorized
Wolf Cinema dealer.

Cleaning and Replacing Filters

Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.

Remove the Filter

Clean the Filter

• Wash the filter with water and dry it in a shaded area.

• In extremely soiled cases, the use of a neutral detergent is recommended. Put on

rubber gloves when using a detergent.

• After washing the filter with water, make sure that it is completely dry before

reinstalling - otherwise electric shock or malfunctions may occur.

• Do not clean the filter with a vacuum cleaner or air duster. The filter is soft and

may be damaged.

Reinstall the Filter

Filter

Purchasing the Replacement Filter

Please consult your authorized Wolf Cinema dealer.

Replacement Filter

Part No.: WC-FPSDC-01

Check that the left and right
claws are locked onto the unit

Summary of Contents for SDC-10
















































































Search results

Summary of Contents for SDC-10

Reviews:

Related manuals for SDC-10

Brands by name

Popular brands

Wolf cinema SDC-10, User Manual

Search results

Summary of Contents for SDC-10

Reviews:

Related manuals for SDC-10

Brands by name

Popular brands