57
SDC-10
Blue
Black
15 sec
On
5 sec
Off
On
Off
On
Off
Off
On (Power)
On (Anamo)
Sets the background color when no input signal is detected.
Settings: Blue, Black
[Blue]
Sets the background color to blue.
Sets the background color to black.
Sets the position of the on-screen menu. By pressing the [OK] button, an image illustration appears at the position
of the menu. The highlighted position in the illustration can be moved via the left and right keys. If one presses [OK],
the menu moves to the highlighted position.
If you press the key to the right, the menu will move starting from the top left -> top right -> central -> bottom right
-> bottom left and then back to the upper left.
By pressing of the left key, the menu moves in the opposite direction.
[Upper left]
Determines the length of time to display the menu.
Settings: 15 sec, On
[On]
If there is no operation for 15 seconds, the menu disappears.
Display is always on until dismissed.
Configures if input is displayed [or not] whenever the input is switched.
Value: 5 sec, on
[5 sec]
Displays for 5 seconds.
Not displayed.
Configures whether or not to display the signal, when the input is switched.
Settings: On, Off
[On]
Display.
Not displayed.
Configures whether or not to display the "D-ILA" logo upon activation.
Settings: On, Off
[On]
Displayed for 5 seconds.
Not displayed.
Configures 12V output to an external device (ex: motorized screen equipped with a trigger function].
Settings: Off, On (Power), On (Anamorphic)
[Off]
No output.
When projector power is turned on, a 12V control pulse is emitted from the trigger output.
When turning off power, the output of the 12V control signal stops.
During standby mode, an output will occur if the OPERATE button is pressed. After cooling, the output stops
[as the projector returns to standby].
Control signals (12V) are emitted when the Anamorphic mode is set from “Off” to “A” or “B”. If the Anamorphic mode
is set to “A” or “B”, the operation in this state equals “On (Power)”.
Establishes a system Power Off Timer.
* If there are no operations, the unit powers off automatically.
* It powers off automatically even while projecting an image.
Settings: Off, 1 hour, 2 hours, 3 hours, 4 hours
[Off]
Back Color
Menu Position
Menu Display
Line Display
Source Display
Logo
Trigger
Off Timer
4
Display Setup
5
Function
Summary of Contents for SDC-10
Page 1: ...SDC 10 ...
