50
SDC-10
1080p D-IL A
®
3D Front Projector
User’s Manual
Off
Mode 1
Mode 2
Mode 3
Mode 4
Inverse Telecine
Left
Right
Top
Bottom
Off
Normal
High
This setting improves scenes with fast motion, helping to produce clearer images with little residual image retention.
For PC and 3D signals, the “Clear motion Drive” cannot be used.
On occasions the image may appear distorted in some scenes, or light and dark flashes might occur. In this case, please choose
“Off”, and then a setting of your choice.
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine
[Off]
Off
Black insertion weak
Black interpolation strong
Interpolation weak
Interpolation strong
With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image footage is changed to a 24 frame display.
(*) 24p will not function.
It is possible to visually confirm the effects of the settings in Mode 3 and Mode 4 of the Clear Motion Drive. Upon pressing the button
“OK”, it will be displayed on all sides of a screen in the center split into two parts. Finally, it will turn to “Off”. It cannot be set for PC
and 3D signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with “OK” button)
[Off]
The left screen displays a demonstration of the Clear motion drive.
The right screen displays a demonstration of the Clear motion drive.
The upper screen displays a demo of the Clear motion drive.
The screen below displays a demo of the Clear motion drive.
The Demo of the Clear motion drive is turned off.
Adjusts the optical iris and aperture setting. A setting of 0 means fully opened.
Settings: (Dark) -15 to 0 (bright)
Adjust the brightness of the lamp.
(*) If continually used in the “High” mode, the lamp will dim sooner and will likely require earlier replacement.
(*) For about 60 seconds after the lamp is lit, the lamp cannot be switched off.
Settings: Normal, High
[Normal]
Normally this setting is optimal (160W drive).
Commonly used in a brighter lit rooms, this setting may be chosen. (220W drive)
[0]
Clear Motion Drive
CMD Demo
Lens Aperture
Lamp Power
Summary of Contents for SDC-10
Page 1: ...SDC 10 ...
