Wolf cinema SDC-10 User Manual Download

Page: 65 / 79

SDC-10

1080p D-IL A

3D Front Projector

User’s Manual

Use only genuine
replacement parts for
the lamp unit. Also, never

attempt to reuse an old lamp. This
may cause a malfunction.

• Do not touch the surface of a new

lamp. This may shorten the lamp
life and cause lamp blowout.

MEMO

After Replacing the Lamp

• Do not place the removed lamp

unit at any location reachable
by children, or set it near
combustible items.

• Dispose of used lamp modules

in the same way as fluorescent
lamps. Follow your local community
rules for disposal.

Remove the Power Plug from the Outlet

Tighten the Screws of the New Lamp Unit

•

Tighten the screws with a

screwdriver.

Attach the Lamp Cover

• Insert the top part (with 2 claws) of the lamp cover into the unit.

• Fasten the screws with a

screwdriver.

Handle

Summary of Contents for SDC-10
















































































Search results

Summary of Contents for SDC-10

Reviews:

Related manuals for SDC-10

Brands by name

Popular brands

Wolf cinema SDC-10, User Manual

Search results

Summary of Contents for SDC-10

Reviews:

Related manuals for SDC-10

Brands by name

Popular brands