69
SDC-10
Please use a shorter HDMI cable.
Will the picture flicker and become
invisible with HDMI input?
Reference page: 28
The Picture Cannot be Projected from HDMI Sources
Set up the “Control with HDMI” function to “Off”.
Is the setup of “Control with HDMI”
function “Off”?
Reference page: 53
The Image Cannot be Seen from an HDMI Source
Check the lamp time on the information menu. Prepare a new
lamp unit or replace as soon as possible when the lamp is near
its end time.
Is the lamp near exhaustion?
Reference page: 62 to 65
Projected Image is Dark
Adjust “Color” and “Tint” in the setting menu.
Is the image correctly adjusted?
Reference page: 49
Color Does Not Appear or Looks Strange
Set “Off Timer” in the setting menu to “Off”.
Has setting been performed for
off timer?
Reference page: 56 to 57
Power is Cut Off Suddenly
Adjust the focus.
Set the unit at a correct distance from the screen.
Is the focus correctly adjusted?
Is the unit placed too near or too far
away from the screen?
Reference page: 34
Reference page: 23, 25
Video Image is Fuzzy
• Even if the “Control with HDMI” function is “On”, there are still some devices that cannot reveal images normally via HDMI.
Remove the power plug when the unit is in standby mode and
remove any blocking object. After that, insert the plug again.
Clean the filter.
Are the air inlets and exhaust vent
blocked?
Is the filter dirty?
Reference page: 3, 15
Reference page: 66
The Unit Works when Power is Turned on but Stops Abruptly After a Few Minutes
Set “Mask” in the setting menu to “Off”.
Alter the “Picture Position” value in the setting menu to ensure
that images are not missing.
Has setting been performed for
screen mask?
Is the display out of position?
Reference page: 37, 53
Reference page: 52
Video Images are Missing or Cropped
Summary of Contents for SDC-10
Page 1: ...SDC 10 ...
