Operating manual
cyber
®
dynamic system
en-10
Doc. no.: 5022-D056658
Revision: 01
Components equipped with permanent magnets and components
that feature magnetic fields can influence/impede the function of
active medical implants (e.g. pacemakers, defibrillators). This can
lead to severe injuries or even death.
Keep a sufficient distance to these components (stator, rotor) during
assembly.
If permanent magnets or permanent magnetic fields are directly
accessible (especially with rotary kit motors or the primary and
secondary parts of linear motors), you are prohibited from
approaching these motor parts.
If there are concerns, contact the manufacturer of the active medical
implants or consult
WITTENSTEIN cyber motor GmbH
.
Objects flung out by moving components can cause serious
injuries and death.
Remove objects and tools from the drive system before putting it into
operation.
Moving components on the drive system can pull in or crush parts
of the body and cause serious injuries and even death.
Keep a sufficient distance to moving machine components when the
drive system is running.
Secure the machine against restarting and unintentional movement
during assembly and maintenance work.
A wrong direction of rotation or direction of movement may result
in serious injury or death.
The direction of rotation or movement may differ from the standard
IEC 60034-8.
Before and during startup, ensure that the drive system has the
correct direction of rotation or movement.
Be sure to avoid a collision (caused e.g. by crashing against
an end stop).
With the danger area secured, check the direction of rotation
or movement in a slow motion, ideally by limiting the current and
torque.
