cyber
®
dynamic system
Operating manual
Revision: 01
Doc. no.: 5022-D056658
en-3
1 About this manual
This manual contains information which is necessary for the safe use of the drive system
cyber
®
dynamic system
, hereafter referred to as the drive system.
Every drive system is described in a technically clear manner with its material number (MN)
and serial number (SN) (see also chapter 3.3
In case of conflict between this general operating manual and the material-specific
documentation, the material-specific documentation applies. This operating manual is valid
for the product (drive system) unless another, material-specific documentation exists.
If this manual is supplied with amendment sheets (e.g. for special applications), then the
information in the amendment is valid. Contradictory specifications in this manual are
therefore void.
The operator must ensure that this operating manual is read through by all persons assigned
to install, operate, or maintain the drive system, and that they fully comprehend its content.
Store this manual within reach of the drive system.
Inform colleagues who work in the area around the machine about the
safety instructions
so that no one is hurt.
The original was prepared in German, all other language versions are translations of the
original instructions.
1.1 Signal words
The following signal words are used to indicate hazards, things that are forbidden and important
information:
This signal word indicates an imminent danger that will cause
serious injuries or even death.
This signal word indicates a potential hazard that could cause
serious injuries and even death.
This signal word indicates a potential hazard that could cause
minor or serious injuries.
This signal word indicates a potential hazard that could lead to
property damage.
A note without a signal word indicates application hints or
especially important information for working with the drive system.
