Operating manual
cyber
®
dynamic system
en-12
Doc. no.: 5022-D056658
Revision: 01
3 Description of the cyber
®
dynamic system
3.1 General information
All drive systems consist of a brushless, electrical machine with an integrated servo drive.
The drive systems of the
CDSL series (linear systems)
consist of a drive system with an
integrated threaded spindle and bearing:
-
The rotation of the drive system is transformed into a linear movement of the tappet via the
threaded spindle. Ball screws are used as threaded spindles.
The drive system can be optionally equipped with a holding brake. The holding brake is
not
a
safety brake.
Designation
A
Power connector
B
Motor housing
C
Orientation hole
D
Shaft pinion / thrust tube
E
Motor flange (output side)
F
Fastening screw thread
G
Name plate
Table 1: CDSR overview
3.2 Code
Hardware:
Figure 3.1: Hardware code
