Wisenet XRN-410S User Manual Download Page 37

Page: 37 / 96

Channel Setting

You can configure the video settings for each channel.

[

]

[

ENTER

]

▼

[

ENTER

]

▼

Device

►

Camera

[

ENTER

]

▼►

Channel Setup

[

ENTER

]

▲▼◄►

[

ENTER

]

•

Apply to CH : If you select <

Apply to CH

>, the "

Apply to CH

" confirmation window will appear.

After selecting channels that the settings will be applied to, click on <

> to apply them to the selected

channels.

• Video

- <

ON/OFF

> : You can turn ON/OFF the selected channel's camera.

- <

Covert1

> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

- <

Covert2

> : Shows nothing but an empty screen while the recording continues.

If the channel is set to <

Covert1

> or <

Covert2

> mode, the channel's sound is not hearable.

However, the channel's sound is recorded if its Audio setting is set to <

>, even the sound is not heard in Live mode.

• Audio

- If set to <

>, you can turn the audio of the channel ON/OFF on the Live screen.

- If set to <

OFF

>, the channel's audio is off on the Live screen and not recorded.

• Camera Name : Provide a camera Name.

You can enter up to 15 characters including space.

Storage Device

You can check information on storage devices.

Device/Format

You can check storage devices and their capacity, usage as well as status.
HDD, USB (memory or HDD) can be connected as a storage device.

[

]

[

ENTER

]

▼

[

ENTER

]

▼

Device

►▼

Storage Device

[

ENTER

]

▼

Device/Format

▲▼◄►

[

ENTER

]

•

Storage Status : Displays the working status of a storage device.

- Red : Displays the situation of video loss.

- Green : Displays the normal situation without video recording losses.

- Status

Full BPS : Displays the current rate of recording.

Current Loss Rate : Displays the current recording loss rate.

Max Loss Amount : Displays the maximum amount of losses up until now.

If the recording loss persists, please refer to the "

Troubleshooting

" in order to perform checks. (Page 82)

•

No. : You can check the designated number for the built-in HDD.

If you want the find out about the location corresponding to the HDD number, refer to the <

HDD Map

>. (XRN-410S no HDD map)

•

Capacity : Displays the amount of storage device use and the full capacity.

•

Usage : Designate the purpose of use for a storage device. (However, only the display function is available for
ARB)

If the state of use is in "

Not Defined

", format the HDD before use.

•

Status : Displays the current working condition of a storage device.
For inspection or replacement of HDD alarms, please refer to "

HDD Alarm Setting.

" (Page 38)

- Normal : It is displayed during normal operation.

- Inspection : Operating with partial problems.

- Replacement : It is displayed when you can no longer use it.

English

_37

● MENU SETUP

Summary of Contents for XRN-410S

































































































Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands

Wisenet XRN-410S, User Manual

Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands