Alarm Out Schedule
You can set the conditions and operating hours for scheduled alarms.
[
MENU
]
Ö
[
ENTER
]
Ö
▼
Ö
<
Menu
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Event
>
Ö
►▼
Ö
<
Alarm Out Schedule
>
Ö
[
ENTER
]
Ö
▲▼◄►
Ö
[
ENTER
]
• Alarm Out : Sets the alarm output method.
`
For further information on alarm output, refer to "
HDD Alarm
>
Alarm
". (Page 38)
- <
ON
> : Marked in green, and always generates alarm on scheduled time.
- <
OFF
> : Marked in black, no alarm is generated even if an event occurs.
- <
Event Sync
> : Marked in orange, generates alarm only when an event occurs.
• Apply to All Alarm out : Applies the configured schedule to all alarms.
M
`
When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
NETWORK CONFIGURATION
It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
Interface
You can set the network connection route and protocol.
Setting a network connection
Sets the protocol and environment of the network.
[
MENU
]
Ö
[
ENTER
]
Ö
▼
Ö
<
Menu
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Network
>
Ö
►
Ö
<
Interface
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Network
>
Ö
▲▼◄►
Ö
[
ENTER
]
•
Network 1 (Camera) : Port recommended for camera connection, which receives a image from the camera.
•
Network 2 (All) : Port recommended for connection with a network, web viewer.
•
Network 1 (Camera) / Network 2 (All) setup
- IP Type : Select a network connection type.
- IP Address, Subnet Mask, Gateway, DNS
<
Static
> : You can manually enter IP address, subnet mask, gateway and DNS.
<
DHCP
> : IP address, subnet mask and gateway values will be automatically set.
<
PPPoE
> : IP address, subnet mask and gateway values will be automatically set.
- User ID, Password : If you set the connection mode to PPPoE, you need to enter "
User ID
" and
"
Password
" to register in PPPoE.
•
Transfer bandwidth : Enter the maximum amount of upload data bandwidth.
Check the assigned setting in Connection Mode before entering your value.
•
Default Gateway : Set the basic gateway by using Network1 / Network2 setup.
M
`
You can manually input DNS of <
DHCP
> and <
PPPoE
> when it selected to <
Manual
>.
44_
menu setup
menu setup
