Wisenet XRN-410S User Manual Download Page 92

Page: 92 / 96

the zlib/libpng License

Copyright (c) 2011 Lee Thomason
Copyright (c) 1995-2012 Jean-loup Gailly and Mark Adler
Copyright (c) 1998-2012 Glenn Randers-Pehrson
Copyright (c) 2003-2005 Hector Mauricio Rodriguez Segura
Copyright (c) 1995-2009 Nullsoft and Contributors
Copyright (c) 2002-2008 Davide Pizzolato
This software is provided 'as-is', without any express or implied warranty.

In no event will the authors be held liable for any damages arising from

the use of this software.;
Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it freely,

subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must

not claim that you wrote the original software. If you use this software

in a product, an acknowledgment in the product documentation would

be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must

not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source

distribution.

Boost Software License - Version 1.0

August 17th, 2003

Permission is hereby granted, free of charge, to any person or

organization obtaining a copy of the software and accompanying

documentation covered by this license (the "Software") to use,

reproduce, display, distribute, execute, and transmit the Software, and to

prepare derivative works of the Software, and to permit third-parties to

whom the Software is furnished to do so, all subject to the following:
The copyright notices in the Software and this entire statement, including

the above license grant, this restriction and the following disclaimer, must

be included in all copies of the Software, in whole or in part, and all

derivative works of the Software, unless such copies or derivative works

are solely in the form of machine-executable object code generated by a

source language processor.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF

ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO

EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE

DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR

OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE

OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

curl License

many contributors, see the THANKS file.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any

purposewith or without fee is hereby granted, provided that the above

ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY

RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH

THE SOFTWARE OR THE USEOR OTHER DEALINGS IN THE

SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall

not be used in advertising or otherwise to promote the sale, use or other

dealings in this Software without prior written authorization of the

Microsoft public License (Ms-pL)

Copyright (c) 2009 Wong Shao Voon
Copyright (c) 1998-2012 Glenn Randers-Pehrson
This license governs use of the accompanying software. If you use the

software, you accept this license. If you do not accept the license, do not

use the software.

1. Definitions
The terms "reproduce," "reproduction," "derivative works," and

"distribution" have the same meaning here as under U.S. copyright

law.
A "contribution" is the original software, or any additions or changes to

the software.
A "contributor" is any person that distributes its contribution under this

license.
"Licensed patents" are a contributor's patent claims that read directly

on its contribution.
2. Grant of Rights

A. Copyright Grant- Subject to the terms of this license, including

the license conditions and limitations in section 3, each contributor

grants you a non-exclusive, worldwide, royalty-free copyright license

to reproduce its contribution, prepare derivative works of its

contribution, and distribute its contribution or any derivative works

that you create.
B. Patent Grant- Subject to the terms of this license, including the

license conditions and limitations in section 3, each contributor

grants you a non-exclusive, worldwide, royalty-free license under its

licensed patents to make, have made, use, sell, offer for sale,

import, and/or otherwise dispose of its contribution in the software

or derivative works of the contribution in the software.

3. Conditions and Limitations

A. No Trademark License- This license does not grant you rights to

use any contributors' name, logo, or trademarks.
B. If you bring a patent claim against any contributor over patents

that you claim are infringed by the software, your patent license

from such contributor to the software ends automatically.
C. If you distribute any portion of the software, you must retain all

present in the software.
D. If you distribute any portion of the software in source code form,

you may do so only under this license by including a complete copy

of this license with your distribution. If you distribute any portion of

the software in compiled or object code form, you may only do so

under a license that complies with this license.
E. The software is licensed "as-is." You bear the risk of using it. The

contributors give no express warranties, guarantees or conditions.

You may have additional consumer rights under your local laws

which this license cannot change. To the extent permitted under

your local laws, the contributors exclude the implied warranties of

merchantability, fitness for a particular purpose and non-

infringement.

the code project Open License (cpOL) 1.02

preamble

This License governs Your use of the Work. This License is intended to

allow developers to use the Source Code and Executable Files provided

as part of the Work in any application in any form.
The main points subject to the terms of the License are:

• Source Code and Executable Files can be used in commercial

applications;

• Source Code and Executable Files can be redistributed; and

• Source Code can be modified to create derivative works.

• No claim of suitability, guarantee, or any warranty whatsoever is

provided. The software is provided "as-is".

• The Article accompanying the Work may not be distributed or

republished without the Author's consent

This License is entered between You, the individual or other entity

reading or otherwise making use of the Work licensed pursuant to this

License and the individual or other entity which offers the Work under the

terms of this License ("Author").

License

THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS

OF THIS CODE PROJECT OPEN LICENSE ("LICENSE"). THE WORK IS

PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW.

ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER

THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN,

YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS

LICENSE. THE AUTHOR GRANTS YOU THE RIGHTS CONTAINED

HEREIN IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH

TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO ACCEPT AND

BE BOUND BY THE TERMS OF THIS LICENSE, YOU CANNOT MAKE

ANY USE OF THE WORK.

definitions.

"Articles"

means, collectively, all articles written by Author which

describes how the Source Code and Executable Files for the Work

may be used by a user.
b.

"Author"

means the individual or entity that offers the Work

under the terms of this License.
c.

"derivative Work"

means a work based upon the Work or upon

the Work and other pre-existing works.
d.

"executable Files"

refer to the executables, binary files,

configuration and any required data files included in the Work.
e.

"publisher"

means the provider of the website, magazine,

CD-ROM, DVD or other medium from or by which the Work is

obtained by You.
f.

"Source code"

refers to the collection of source code and

configuration files used to create the Executable Files.
g.

"Standard Version"

refers to such a Work if it has not been

modified, or has been modified in accordance with the consent of

the Author, such consent being in the full discretion of the Author.
h.

"Work"

refers to the collection of files distributed by the

Publisher, including the Source Code, Executable Files, binaries,

data files, documentation, whitepapers and the Articles.
i.

"You"

is you, an individual or entity wishing to use the Work and

exercise your rights under this License.

Fair use/Fair use rights.

Nothing in this License is intended to

reduce, limit, or restrict any rights arising from fair use, fair dealing, first

sale or other limitations on the exclusive rights of the copyright owner

under copyright law or other applicable laws.
3.

License Grant.

Subject to the terms and conditions of this License,

the Author hereby grants You a worldwide, royalty-free, non-exclusive,

perpetual (for the duration of the applicable copyright) license to

exercise the rights in the Work as stated below:

a. You may use the standard version of the Source Code or

Executable Files in Your own applications.
b. You may apply bug fixes, portability fixes and other modifications

obtained from the Public Domain or from the Author. A Work

modified in such a way shall still be considered the standard version

and will be subject to this License.
c. You may otherwise modify Your copy of this Work (excluding the

Articles) in any way to create a Derivative Work, provided that You

insert a prominent notice in each changed file stating how, when

and where You changed that file.
d. You may distribute the standard version of the Executable Files

and Source Code or Derivative Work in aggregate with other

(possibly commercial) programs as part of a larger (possibly

commercial) software distribution.
e. The Articles discussing the Work published in any form by the

author may not be distributed or republished without the Author's

consent. The author retains copyright to any such Articles. You may

use the Executable Files and Source Code pursuant to this License

but you may not repost or republish or otherwise distribute or make

available the Articles, without the prior written consent of the Author.

Any subroutines or modules supplied by You and linked into the

Source Code or Executable Files this Work shall not be considered

part of this Work and will not be subject to the terms of this License.

patent License.

Subject to the terms and conditions of this

License, each Author hereby grants to You a perpetual, worldwide,

non-exclusive, no-charge, royalty-free, irrevocable (except as stated in

this section) patent license to make, have made, use, import, and

otherwise transfer the Work.
5. Restrictions. The license granted in Section 3 above is expressly

made subject to and limited by the following restrictions:

a. You agree not to remove any of the original copyright, patent,

trademark, and attribution notices and associated disclaimers that

may appear in the Source Code or Executable Files.
b. You agree not to advertise or in any way imply that this Work is a

product of Your own.
c. The name of the Author may not be used to endorse or promote

products derived from the Work without the prior written consent of

the Author.
d. You agree not to sell, lease, or rent any part of the Work. This

does not restrict you from including the Work or any part of the

Work inside a larger software distribution that itself is being sold.

The Work by itself, though, cannot be sold, leased or rented.
e. You may distribute the Executable Files and Source Code only

under the terms of this License, and You must include a copy of, or

the Uniform Resource Identifier for, this License with every copy of

the Executable Files or Source Code You distribute and ensure that

anyone receiving such Executable Files and Source Code agrees

that the terms of this License apply to such Executable Files and/or

Source Code. You may not offer or impose any terms on the Work

that alter or restrict the terms of this License or the recipients'

exercise of the rights granted hereunder. You may not sublicense

the Work. You must keep intact all notices that refer to this License

and to the disclaimer of warranties. You may not distribute the

Executable Files or Source Code with any technological measures

that control access or use of the Work in a manner inconsistent with

the terms of this License.
f. You agree not to use the Work for illegal, immoral or improper

purposes, or on pages containing illegal, immoral or improper

material. The Work is subject to applicable export laws. You agree

to comply with all such laws and regulations that may apply to the

Work after Your receipt of the Work.

representations, Warranties and disclaimer.

THIS WORK IS

PROVIDED "AS IS", "WHERE IS" AND "AS AVAILABLE", WITHOUT

ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OR

GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE,

INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT,

SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL EXPRESS,

IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,

INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS

OF MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS

FOR A PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR

NON-INFRINGEMENT, OR THAT THE WORK (OR ANY PORTION

THEREOF) IS CORRECT, USEFUL, BUG-FREE OR FREE OF

VIRUSES. YOU MUST PASS THIS DISCLAIMER ON WHENEVER YOU

DISTRIBUTE THE WORK OR DERIVATIVE WORKS.
7.

indemnity.

You agree to defend, indemnify and hold harmless the

Author and the Publisher from and against any claims, suits, losses,

damages, liabilities, costs, and expenses (including reasonable legal or

attorneys' fees) resulting from or relating to any use of the Work by

You.
8.

Limitation on Liability.

EXCEPT TO THE EXTENT REQUIRED BY

APPLICABLE LAW, IN NO EVENT WILL THE AUTHOR OR THE

PUBLISHER BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY

SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR

EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE

USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR

THE PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES.
9.

termination.

a. This License and the rights granted hereunder will terminate

automatically upon any breach by You of any term of this License.

Individuals or entities who have received Derivative Works from You

under this License, however, will not have their licenses terminated

provided such individuals or entities remain in full compliance with

those licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any

termination of this License.
b. If You bring a copyright, trademark, patent or any other

infringement claim against any contributor over infringements You

claim are made by the Work, your License from such contributor to

the Work ends automatically.

Summary of Contents for XRN-410S

































































































Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands

Wisenet XRN-410S, User Manual

Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands