Wisenet XRN-410S User Manual Download Page 89

Page: 89 / 96

a) Accompany the work with the complete corresponding machine-

readable source code for the Library including whatever changes

were used in the work (which must be distributed under Sections 1

and 2 above); and, if the work is an executable linked with the Library,

with the complete machine-readable "work that uses the Library", as

object code and/or source code, so that the user can modify the

Library and then relink to produce a modified executable containing

the modified Library. (It is understood that the user who changes the

contents of definitions files in the Library will not necessarily be able to

recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library.

A suitable mechanism is one that (1) uses at run time a copy of the

library already present on the user's computer system, rather than

copying library functions into the executable, and (2) will operate

properly with a modified version of the library, if the user installs one,

as long as the modified version is interface-compatible with the

version that the work was made with.
c) Accompany the work with a written offer, valid for at least three

years, to give the same user the materials specified in Subsection 6a,

above, for a charge no more than the cost of performing this

distribution.
d) If distribution of the work is made by offering access to copy from a

designated place, offer equivalent access to copy the above specified

materials from the same place.
e) Verify that the user has already received a copy of these materials

or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library"

must include any data and utility programs needed for reproducing the

executable from it. However, as a special exception, the materials to be

distributed need not include anything that is normally distributed (in either

source or binary form) with the major components (compiler, kernel, and

so on) of the operating system on which the executable runs, unless that

component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of

other proprietary libraries that do not normally accompany the operating

system. Such a contradiction means you cannot use both them and the

Library together in an executable that you distribute.

. You may place library facilities that are a work based on the Library

side-by-side in a single library together with other library facilities not

covered by this License, and distribute such a combined library, provided

that the separate distribution of the work based on the Library and of the

other library facilities is otherwise permitted, and provided that you do

these two things:

a) Accompany the combined library with a copy of the same work

based on the Library, uncombined with any other library facilities. This

must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part

of it is a work based on the Library, and explaining where to find the

accompanying uncombined form of the same work.

. You may not copy, modify, sublicense, link with, or distribute the

Library except as expressly provided under this License. Any attempt

otherwise to copy, modify, sublicense, link with, or distribute the Library is

void, and will automatically terminate your rights under this License.

However, parties who have received copies, or rights, from you under

this License will not have their licenses terminated so long as such

parties remain in full compliance.

. You are not required to accept this License, since you have not signed

it. However, nothing else grants you permission to modify or distribute

the Library or its derivative works. These actions are prohibited by law if

you do not accept this License. Therefore, by modifying or distributing

the Library (or any work based on the Library), you indicate your

acceptance of this License to do so, and all its terms and conditions for

copying, distributing or modifying the Library or works based on it.

. Each time you redistribute the Library (or any work based on the

Library), the recipient automatically receives a license from the original

licensor to copy, distribute, link with or modify the Library subject to

these terms and conditions. You may not impose any further restrictions

on the recipients' exercise of the rights granted herein. You are not

responsible for enforcing compliance by third parties with this License.

. If, as a consequence of a court judgment or allegation of patent

infringement or for any other reason (not limited to patent issues),

conditions are imposed on you (whether by court order, agreement or

otherwise) that contradict the conditions of this License, they do not

excuse you from the conditions of this License. If you cannot distribute

so as to satisfy simultaneously your obligations under this License and

any other pertinent obligations, then as a consequence you may not

distribute the Library at all. For example, if a patent license would not

permit royalty-free redistribution of the Library by all those who receive

copies directly or indirectly through you, then the only way you could

satisfy both it and this License would be to refrain entirely from

distribution of the Library.
If any portion of this section is held invalid or unenforceable under any

particular circumstance, the balance of the section is intended to apply,

and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents

or other property right claims or to contest validity of any such claims;

this section has the sole purpose of protecting the integrity of the free

software distribution system which is implemented by public license

practices. Many people have made generous contributions to the wide

range of software distributed through that system in reliance on

consistent application of that system; it is up to the author/donor to

decide if he or she is willing to distribute software through any other

system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be

a consequence of the rest of this License.

. If the distribution and/or use of the Library is restricted in certain

countries either by patents or by copyrighted interfaces, the original

explicit geographical distribution limitation excluding those countries, so

that distribution is permitted only in or among countries not thus

excluded. In such case, this License incorporates the limitation as if

written in the body of this License.

. The Free Software Foundation may publish revised and/or new

versions of the Lesser General Public License from time to time. Such

new versions will be similar in spirit to the present version, but may differ

in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library

specifies a version number of this License which applies to it and "any

later version", you have the option of following the terms and conditions

either of that version or of any later version published by the Free

Software Foundation. If the Library does not specify a license version

number, you may choose any version ever published by the Free

Software Foundation.

. If you wish to incorporate parts of the Library into other free

programs whose distribution conditions are incompatible with these,

write to the author to ask for permission. For software which is

copyrighted by the Free Software Foundation, write to the Free Software

Foundation; we sometimes make exceptions for this. Our decision will be

guided by the two goals of preserving the free status of all derivatives of

our free software and of promoting the sharing and reuse of software

generally.

nO WArrAntY

. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE

IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED

BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN

WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES

PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE

QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU.

SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST

OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE

LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO

LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR

LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF

THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF

SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

end OF terMS And cOnditiOnS

how to Apply these terms to Your new Libraries

If you develop a new library, and you want it to be of the greatest

possible use to the public, we recommend making it free software that

everyone can redistribute and change. You can do so by permitting

redistribution under these terms (or, alternatively, under the terms of the

ordinary General Public License).
To apply these terms, attach the following notices to the library. It is

safest to attach them to the start of each source file to most effectively

convey the exclusion of warranty; and each file should have at least the

"copyright" line and a pointer to where the full notice is found.

one line to give the library's name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-

1307 USA

Also add information on how to contact you by electronic and paper

mail.
You should also get your employer (if you work as a programmer) or your

school, if any, to sign a "copyright disclaimer" for the library, if necessary.

Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in
the library `Frob' (a library for tweaking knobs) written
by James Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice

That's all there is to it!

MOZiLLA puBLic LicenSe

Version 1.1

1. definitions.

1.0.1. "commercial use"

means distribution or otherwise making the

Covered Code available to a third party.

1.1. "contributor"

means each entity that creates or contributes to

the creation of Modifications.

1.2. "contributor Version"

means the combination of the Original

Code, prior Modifications used by a Contributor, and the Modifications

made by that particular Contributor.

1.3. "covered code"

means the Original Code or Modifications or the

combination of the Original Code and Modifications, in each case

including portions thereof.

1.4. "electronic distribution Mechanism"

means a mechanism

generally accepted in the software development community for the

electronic transfer of data.

1.5. "executable"

means Covered Code in any form other than

Source Code.

1.6. "initial developer"

means the individual or entity identified as the

Initial Developer in the Source Code notice required by

exhibit A

1.7. "Larger Work"

means a work which combines Covered Code or

portions thereof with code not governed by the terms of this License.

1.8. "License"

means this document.

1.8.1. "Licensable"

means having the right to grant, to the maximum

extent possible, whether at the time of the initial grant or subsequently

acquired, any and all of the rights conveyed herein.

1.9. "Modifications"

means any addition to or deletion from the

substance or structure of either the Original Code or any previous

Modifications. When Covered Code is released as a series of files, a

Modification is:

. Any addition to or deletion from the contents of a file containing

Original Code or previous Modifications.

. Any new file that contains any part of the Original Code or

previous Modifications.

1.10. "Original code"

means Source Code of computer software

code which is described in the Source Code notice required by

exhibit

as Original Code, and which, at the time of its release under this

License is not already Covered Code governed by this License.

1.10.1. "patent claims"

means any patent claim(s), now owned or

hereafter acquired, including without limitation, method, process, and

apparatus claims, in any patent Licensable by grantor.

1.11. "Source code"

means the preferred form of the Covered Code

for making modifications to it, including all modules it contains, plus

any associated interface definition files, scripts used to control

compilation and installation of an Executable, or source code

differential comparisons against either the Original Code or another well

known, available Covered Code of the Contributor's choice. The

Source Code can be in a compressed or archival form, provided the

appropriate decompression or de-archiving software is widely available

for no charge.

1.12. "You" (or "Your")

means an individual or a legal entity exercising

rights under, and complying with all of the terms of, this License or a

future version of this License issued under Section 6.1. For legal

entities, "You'' includes any entity which controls, is controlled by, or is

under common control with You. For purposes of this definition,

"control'' means (a) the power, direct or indirect, to cause the direction

or management of such entity, whether by contract or otherwise, or (b)

ownership of more than fifty percent (50%) of the outstanding shares

or beneficial ownership of such entity.

2. Source code License.

2.1. the initial developer Grant.

The Initial Developer hereby grants

You a world-wide, royalty-free, non-exclusive license, subject to third

party intellectual property claims:

(a)

under intellectual property rights (other than patent or trademark)

Licensable by Initial Developer to use, reproduce, modify, display,

perform, sublicense and distribute the Original Code (or portions

thereof) with or without Modifications, and/or as part of a Larger

Work; and

(b)

under Patents Claims infringed by the making, using or selling of

Original Code, to make, have made, use, practice, sell, and offer for

sale, and/or otherwise dispose of the Original Code (or portions

thereof).

(c)

the licenses granted in this Section 2.1(a) and (b) are effective on

the date Initial Developer first distributes Original Code under the

terms of this License.

(d)

Notwithstanding Section 2.1(b) above, no patent license is

granted: 1) for code that You delete from the Original Code; 2)

separate from the Original Code; or 3) for infringements caused by:

i) the modification of the Original Code or ii) the combination of the

Original Code with other software or devices.

2.2. contributor Grant.

Subject to third party intellectual property

claims, each Contributor hereby grants You a world-wide, royalty-free,

non-exclusive license

(a)

under intellectual property rights (other than patent or trademark)

Licensable by Contributor, to use, reproduce, modify, display,

perform, sublicense and distribute the Modifications created by

such Contributor (or portions thereof) either on an unmodified basis,

with other Modifications, as Covered Code and/or as part of a

Larger Work; and

(b)

under Patent Claims infringed by the making, using, or selling of

Modifications made by that Contributor either alone and/or in

combination with its Contributor Version (or portions of such

combination), to make, use, sell, offer for sale, have made, and/or

otherwise dispose of: 1) Modifications made by that Contributor (or

portions thereof); and 2) the combination of Modifications made by

that Contributor with its Contributor Version (or portions of such

combination).

(c)

the licenses granted in Sections 2.2(a) and 2.2(b) are effective on

the date Contributor first makes Commercial Use of the Covered

Code.

(d)

Notwithstanding Section 2.2(b) above, no patent license is

granted: 1) for any code that Contributor has deleted from the

Summary of Contents for XRN-410S

































































































Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands

Wisenet XRN-410S, User Manual

Search results

Summary of Contents for XRN-410S

Reviews:

Related manuals for XRN-410S

Brands by name

Popular brands