Camera Event
You can set the activation of events (motion detection, video analysis, audio event) sent from the camera, alarm
output method and alarm time.
[
MENU
]
Ö
[
ENTER
]
Ö
▼
Ö
<
Menu
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Event
>
Ö
►▼
Ö
<
Camera Event
>
Ö
[
ENTER
]
Ö
▲▼◄►
Ö
[
ENTER
]
•
Apply to CH : If you select <
Apply to CH
>, the "
Apply to CH
" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <
OK
> to apply them to the selected
channels.
•
Camera Event : Select whether to use an event detection.
•
MD : Select whether or not to use motion detection from camera.
•
Smart Search : Enables or disables the Smart Search option.
`
To use the smart search function, the smart search option must be set to <
ON
>. Refer to “
Smart Search
” (page 52).
•
Cam : Select an event detection channel. If you select a camera item, the "
Camera preset
" screen will
appear. Select a channel to connect and set the preset.
`
You can set the preset in PTZ mode.
•
Alarm : Select the method for alarm output.
`
For more details, refer to "
HDD alarm
>
Alarm
". (Page 38)
•
Alarm Duration : Set the duration of alarm.
•
Camera MD : You can set the detailed setting of motion detection for a network camera connected.
- Mode : Set the motion detection mode.
- Area : Click on <
Setup
> and when the detailed setup menu appears, set the motion detection area.
- Sensitivity : Set the sensitivity for motion detection. (very low/low//medium/high/very high).
- Size : Click on <
Setup
>. When the detailed setup menu appears, set the max/min size of the object to be
detected.
- Activation Time : Select the operation time of motion detection.
After finishing with setup, click on the <
OK
> button to move back to the previous screen after saving the setup.
Video Loss Detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
[
MENU
]
Ö
[
ENTER
]
Ö
▼
Ö
<
Menu
>
Ö
[
ENTER
]
Ö
▼
Ö
<
Event
>
Ö
►▼
Ö
<
Video Loss Detection
>
Ö
[
ENTER
]
Ö
▲▼◄►
Ö
[
ENTER
]
•
Apply to CH : If you select <
Apply to CH
>, the "
Apply to CH
" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <
OK
> to apply them to the selected
channels.
• Video Loss State : Specify the use of video loss detection.
• Alarm Out : Select an alarm output method.
`
For further information on alarm output, refer to "
HDD Alarm
>
Alarm
". (Page 38)
• Alarm Duration : Specify the duration of the alarm output with the beep.
English
_43
● MENU SETUP
