Winterthur Gas & Diesel Ltd. X52 Operation Manual Download Page 303

Page: 303 / 519

PROCEDURE

Select the applicable control console.

To change the speed, do the steps that follow:

2.1

Use the rotary button to select the fuel command button.

2.2

Turn the rotary button to set the related fuel injection quantity.

NOTE:

Refer to the time limits given in

8.8 Maneuver the ship - general

To operate the engine in the opposite direction, do the steps that follow:

3.1

Use the rotary button to select the fuel command button.

3.2

Turn the rotary button to set the fuel injection quantity to approximately 30%.

3.3

Push the related button START AHD or START AST.

NOTE:

After some minutes the engine operates in the opposite direction.

CLOSE UP

•

None

X52

AA00-0000-00AAA-131C-A

Operation Manual

Maneuver the ship

Winterthur Gas & Diesel Ltd.

- 303 -

Issue 002 2018-11

Summary of Contents for X52








































































































































































































































































































































































































































































































































Search results

Summary of Contents for X52

Reviews:

Winterthur Gas & Diesel Ltd. X52, Operation Manual, Page: 303 / 519

Search results

Summary of Contents for X52

Reviews: