blueCompact
Select and install cylinder
07/2021
V 01
Tip
The cylinder cam can be adjusted to eight different
positions.
You can place the cam in the required position to
prepare for cylinder installation.
Special tools:
•
Release cam (e. g. bent paper clip)
Adjust cam
Adjust cam
1.
Push in the pressure bolt (1) with a release pin (2).
2.
Turn cam.
ü
The pressure bolt automatically engages.
Note
Reduced protection against burglary due to
incorrectly aligned cam.
3.
Repeat steps 1 and 2 until the cam is in the required position. The
cam must face the door hinge side after the fitted cylinder has been
locked.
4.6 Install cylinder type 01, type 02, type 05
Install cylinder type 01, Type 02, Type 05
Tip
One side of the cylinder in type 05 features a
purely mechanical function. It features a red mark
underneath the keyway. This side must be fitted
towards the inside.
Prerequisites:
•
Old cylinder has been removed.
–
see "Dismount old cylinder", page 37
•
New cylinder has been selected by type and dimensions.
–
see "Determine cylinder type", page 37
•
Face plate screw has been checked and also shortened if necessary.
–
see "Shorten face plate screw", page 42
–
see "Shorten face plate screw", page 42
Insert cylinder
Insert cylinder
1.
Insert key (3) into the keyway (2).
2.
Turn the key (3) to place cam (1) in the zero position.
Note
Material damage caused by using force to fit
cylinder and incorrect cylinder installation!
3.
Insert cylinder into the profile channel (4) with magnetic protection
(5) facing the outer side. If the cylinder is stuck, carefully jiggle with
the key and push cylinder in. Contact specialist company if you
experience problems.
blueCompact electronic locking system
43
