blueCompact
Select and install cylinder
07/2021
V 01
4.1
Dismount old cylinder
Special tools:
•
Screwdriver
Undo face plate screw
Undo face plate screw
1.
Undo face plate screw (1) and remove.
Place cam in zero position
Remove cylinder
2.
Gently turn key (3), so that the cam (1) is placed in the zero position.
Note
Material damage caused by removing cylinder
with pliers or using tools or other means to
increase force.
3.
Carefully remove cylinder (2) with inserted key (3) from the lock.
4.
If the cylinder (2) is stuck, carefully jiggle with the key (3) and slowly
remove cylinder (2). Contact specialist company if you experience
problems.
4.2 Determine cylinder type
Tip
Cylinders must be adjusted to the lock concerned.
You need determine whether the cam in the
old cylinder rotates freely or not when the key
is removed to ensure that you select the right
cylinder.
Precondition:
•
Old cylinder has been removed.
–
see "Dismount old cylinder", page 37
blueCompact electronic locking system
37
